SAMPLE COOLERS. SC
Cooling the sample before analysis
The coolers´ SC series provide high cooling efficiency, being most suitable for most liquid, gas, or steam process applications.Data Sheet
RESIN COLUMN. CR
For measurement of cationic conductivity
The function of the cationic resin columns is the removal by exchange of all the cations contained in a sample that come mainly from the dosage of some compound. The most commonly removed cations are the NH4 + from the amine dosage.Data Sheet
For degassed conductivity measurement
The degassed DG-50, is a device designed to degas the sample to be analyzed in water-steam cycles, eliminating dissolved gases, especially CO2 and obtaining a measurement of degassed conductivity.
This design occupies minimum space and allows the integration of degassed, degassed + cationic or degassed + cationic + specific measurements in the degassed itself.Data Sheet
With temperature adjustment @ Atmospheric pressure
The degassed DG-105, is a device designed to degas the sample to be analyzed in water-steam cycles, eliminating dissolved gases, especially CO2 and obtaining a measurement of degassed conductivity.
The advanced design of the DG-105 temperature degasser, performs an automatic temperature setpoint according to the atmospheric pressure , thus rapidly obtaining the degassed conductivity measurement, since it is not required to reach boiling point.Data Sheet
BACK PRESSUER RELIEF VALVE. BPR
To stabilize pressure and flow in the sample before analysis / Safety valve
The pressure regulating valve BPR is used in lines of sampling systems, before the input to the analyzers, providing a constant pressure and flow of input to the analyzers.Data Sheet
THERMAL SHUT-OFF VALVE. TVS
For protection of people and analyzers in cases of high temperatures
In the event that the sample temperature rises above the operating temperature of 49 ° C (120 ° F), the VTS thermal actuator modulates the valve to close the inlet port and prevent damage to equipment and instrumentation.Data Sheet
PRESSURE REDUCED VALVE “Rod-in-tube”. HPRV
To reduce high pressures avoiding jams due to dirt in the line
The HPRV high pressure reducing valve is designed for high pressure lines in sample systems, with an inlet pressure between 35 and 350 barg.
Its design is specific to be used in conjunction with the BPRData Sheet
STREAMS SEQUENCER. SQ
To obtain measurements of up to eight samples, with only one or two analyzers
System to measure several samples through a single analyzer, differentiating the measurement of each sample with independent outputs. Our sequencers can operate two analyzers at once and up to eight different samples.
The manifold block is directly coupled to the sequencer, which saves space and avoids inter-wiring between the sequencer and solenoid valves.Data Sheet
WATER CHILLER. WTCU
To stabilize the sample temperature at the ideal analysis temperature
The temperature control unit (WTCU) is a water condenser cooling system, which is responsible for providing the appropriate temperature to the cooling water that is used as a cooling fluid in the secondary coolers of the sample lines, in order to obtain a stable temperature of it.Data Sheet
CONDITIONING PANELS. CP
Panels for sample conditioning.
These panels are delivered fully integrated with the components selected by our clients. Built according to ASME PTC 19.11 standard, they allow multiple configurations according to customer needs.
They allow attaching another panel with analyzers to have a conditioning and analysis system for a sample in a single panel.Data Sheet